Cleaning Water Inlet Strainers - Siemens TOP WM5200 Operating And Installation Instructions

Cleaning water inlet
strainers
Cleaning the strainer at
the water tap
To avoid unused detergent from flowing into the
drain during the next wash cycle:
Pour 1 litre of water into chamber II.
Select the "Pumping" programme.
This is necessary if very little or no water flows
into the washing machine.
First release the water pressure in the supply
hose:
Turn off the water tap.
Turn the programme selector to any programme.
(Except "Spin" and "Pumping")
Press the "Start" button, and allow the programme
to run for approx.40 seconds.
Disconnect the hose from the water tap.
Rinse the strainer under flowing water.
Reconnect the hose.
31