Cable Box Only - Sony WEGA KE-37XS910 Operating Instructions Manual

Cable Box Only
Your cable company scrambles all channels, which requires you to use a
cable box.
You do not have a VCR. (If you have a VCR, see pages 30 and 32.)
ii ¸ i i- i- b i.
Use the TV remote control to change channels coming through the cable
box to the TV's VHF/UHF jack. (You must first pro_am the remote
control for your specific cable box.)
AiFh i b !_ _ i _< _ _iJ _¸ F ¸¸ <i_i i _ ! F
With this connection, all channels come into the TV tln'ough your cable box and
only one unscrambled signal is sent to the TV, so you cannot use the dual picture
features. If some of your channels are scrambled, but others are not, consider using
the "Cable Box and (;able Only" on page 25 instead.
Connect the CATV cable to the cable box's input jack.
Use the supplied antenna cable to connect the cable box's output jack to
the TV's VHF/UHF jack.
Run the Auto Setup pro_am, as described in "Setting Up the Channel
List" on page 48.
CATV
cable
IN
Antenna cable
(supplied)
OUT
VHF/UHF
Rear of TV