Gree GWC09KF-K3DNA5A Owner's Manual page 11

Operation of wireless remote control
NOTE: This remote control is universal, it could be used formany units, some
buttons of this control which are not available to this unit will not be
described below.
Remote control
SLEEP
Sleep button
Press this button, enter into SLEEP state,
●
when repressed, it will quit. The sleep function
will be canceled with the stop of the unit.
There is no SLEEP function under AUTO
and FAN mode.
function.
At COOL, DRY mode: the SLEEP mode runs
●
after 1hour, the setting temp. will be increased
by 1 , 2 hour later, setting temp. will be
℃
increased by 2
℃
setting temperature.
At HEAT mode: the SLEEP mode runs
●
after 1hour, the setting temp
decreased by
1
will be decreased by
at setting temperature.
Names and functions of remote control buttons
FAN
AUTO
AIR HEALTH X-FAN
HUMIDITY
FILTER
TURBO
HOUR
ON/OFF
ON/OFF
MODE
FAN
X-FAN TEMP TIMER
TURBO SLEEP LIGHT
is the icon for sleep
and then will run at this
will be
setting temp.
2 hours later
℃
then it will run
2 ,
℃
X-FAN
X-FAN button
Set X-FAN on (the characters of X-FAN will
●
appear)or off (the characters of X-FAN
disappear ) by pressing this key under
cool or dehumidify mode. Once energized,
the unit will be defaulted to be X-FAN off.
This function can not be set under auto,
fan or heat mode, and the characters of
X-FAN won't appear.
Note X-FAN is the alternative expression
of BLOW for the purpose of understanding.
LIGHT
Light button
Press this button to select LIGHT on or off
●
in the displayer. When the LIGHT on is
set,the icon
indicator light in the displayer will be on.
When the LIGHT off is set, the icon
be displayed and the indicator light in the
displayer will be off.
TEMP
Temp. display button
After powered on, displaying presetting
●
temperature is defaulted,(According to
customer requirements to display,if there
are no requirements,the presetting temp-
erature displaying is defaulted, there is
no signal display on the remote control).
Press this button, (display
the presetting temperature; (display
display indoor ambient temperature,
will not change current display status. If
current display status is indoor ambient temp.
when received other remote control sginal,
then will display presetting temp., 5s later
return to ambient temp. display.
Other models haven't this function. But
pressing this button, the main unit will click
and keep the original status.
8
will be displayed and the
), display
will
),