Selecting Tv Aspect - TECHWOOD DVDC-95 Owner's Manual

Selecting TV Aspect

Select the appropriate screen type according to your
TV set; conventional size screen (4:3) or wide-screen
(16:9).
4:3 Letterbox
4:3 Panscan
Cut Off
16:9 Wide
At the SETUP screen, press
Aspect" and press
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
5.1 Speaker Setup
Press to select the desired Aspect and press
ENTER.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
5.1 Speaker Setup
NOTE : Use panscan sething for regulal TV's
You must select the type of TV picture (aspect ratio) that corre-
sponds to the type of TV you are connecting to the DVD changer
Conventional televisions have 4:3 screen ratios. Wide-screen tele-
visions have 16:9 ratios.
If you are connecting to a conventional television, it is recommend-
ed that you select the 4:3 Panscan mode. If you are connecting to
a Wide-screen television select 16:9 Wide.
4:3 Letterbox : The video material not formatted in the Pan &
Scan style is played back in the letterbox style (black bands
appear at top and bottom of screen).
4:3 Panscan : Select when a conventional TV set is
connected. The video material formatted in the Pan & Scan style is
played back in that style (the left and right edges are cut off).
16:9 Wide : Select when a wide-screen TV set is connected.
Played in "FULL" size. (Setting the wide-screen TV to "FULL" mode
is also necessary.)
* Each screen shows an example when the video material for a
wide-screen is played.
(This setting does not affect the video material for
conventional size.)
28
to select "TV
.
4:3 Letterbox
4:3 Panscan
16:9 Wide
4:3 Letterbox
4:3 Panscan
16:9 Wide