TECHWOOD DVDC-95 Owner's Manual page 39

Memorizing Settings for Viewed DVDs (Condition Memory)
This unit can store in memory settings for DVDs you
watched. Settings remain in memory even if you remove
the disc from the player, or switch power to the player
OFF. If you load a disc that has its settings memorized,
the "Memorized Disc Resume?" message will appear on
the TV screen. When you start playing the disc, the
memorized settings are automatically recalled.
You can memorize details for the following six settings.
Last Stop Position (Page 21)
TV Aspect (Page 28)
Disc Audio Language (Page 34)
Disc Subtitle Language (Page 34)
Disc Menu Language (Page 25)
Angle (Page 35)
Load the DVD that has memorized.
It will appear on the TV screen as below
If the screen is left for more than 7 seconds, play
back will start automtically.
Memorized Disc
1. No
Press 2 to select "Yes"
The memorized settings are automatically recalled.
Notes
Settings are stored in memory for use any time.
You can store settings for up to 15 DVDs in memory. lf you memorize
settings for more than 15 DVDs previously memorized settings will be
erased. Subsequently, if you try to call up these previously memorized
settings, you will ger the latest settings that have taken their place.
Switching of the audio mode etc., is automatic on some discs.
39
Resume?
2. Yes