TECHWOOD DVDC-95 Owner's Manual page 27

5-disc dvd/cd changer
Table of Contents

Advertisement

Selecting rating level and password
To clear your 4-digit password
Follow the step-by-step procedure below if you
forgot or do not know the 4 digit password.
1
Turn on the SETUP screen
2
Press
to select and highlight"Pass-
word"
3
Enter the following 6-digit nomber and
press enter: 210499 ENTER
Note: The #210499 will not appear in the
screen.
3
Enter a new password following the
instructions in the "setting your pass-
word" section
.
Setting your password (DVD only)
If you change the rating level to "7" or lower, you must enter a 4-
digit "password" to prevent playback of discs with higher ratings.
At the SETUP screen, press
word" and press
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
5.1 Speaker Setup
Input a 4-digit password and press ENTER.
Example : 1234
Do not forget your password.
Input the 4-digit password again and press ENTER
to verify.
Setting is finished.
The rating is locked. Any discs whose rating is higher than the
setting
cannot
be
password is entered.
To change/clear memorized password
At the SETUP screen, press
word" and press
Input your password and Press ENTER.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
TV Output Select
Pseudo PAL
Digital Audio Output
5.1 Speaker Setup
To change or clear your password, press
select the "Change" or "Clear" and press ENTER.
27
to select "Pass-
.
NEW
— — — —
played
back
unless
to select "Pass-
.
Change
Clear
the
correct
to

Advertisement

Table of Contents
loading

Table of Contents