TECHWOOD DVDC-95 Owner's Manual page 18

Basic Playback System
This section shows you the basics on how to play back a DVD video disc.
DVDC 95 DVDC 95 5-DISC 5-DISC DVD/CD DVD/CD CHANGE R CHANGE R
Preparations
When you want to play back DVD video discs, turn on the TV and select
the video input source connected to the DVD player.
If connected to an audio system, when you want to enjoy the sound of
DVD video discs or audio CDs from the audio system, turn on the audio
system and select the input source connected to the DVD player.
For connection details, see pages 12 through 17.
Set the playback picture size according to the aspect ratio of the con-
nected TV at the SETUP menu (TV Aspect).
If you do not have the necessary equipment to enjoy Dolby Digital (AC-
3) sound, set the Digital Audio Output at the SETUP (Digital Audio
Output) menu to "PCM".
Press POWER.
The DVD player turns on and the power indicator turn off.
Press OPEN/CLOSE.
The disc tray opens.
You can open the disc tray by pressing this button even if the DVD play-
er is in standby mode.
Place a disc on the disc tray with the
playback side down.
There are two different disc sizes. Place the disc in the
correct guide on the disc tray. If the disc is out of the guide, it may dam-
age the disc and cause the DVD player to malfunction.
Do not place anything except 3" discs or 5" discs on the disc tray.
Discs can be loaded one at a time by pressing DISC SKIP or DISC
SELECT (1 - 5) to rotate the carousel.
Caution: Do not touch the loading drawer and carousel
while they are in motion, and do not attempt to rotate
the carousel by hand; doing so could result in incorrect
operation of the player and/or damage to the discs.
Press OPEN/CLOSE to close the loading drawer.
The disc on the tray 1 is ready to be played back. Playback
may begin automatically depending on some DVDs.
If no disc is loaded on the disc tray 1, select another disc by
following step 5.
Do not close the loading drawer by hand.
If the disc is placed in upside down (and it is a single sided disc), "NO
DISC" or "DISC ERROR" appears on the TV screen.
Operating status indicator
If you insert an audio CD, the CD indicator lights up in the DVD
display. The title number does not appear.
After playing back all of the chapters in the title, the DVD player auto-
matically stops and returns to the menu screen.
18