TECHWOOD DVDC-95 Owner's Manual page 13

Connecting to Optional Audio System with Stereo only
You can listen to the sound of audio CDs and DVD video discs in stereo.
For the best picture, if the TV has an S-video
input, connect the DVD player with the S-video
cable. otherwise, use the composite video out jack.
Notes
Refer to the owner's manual of your audio system as well.
When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet
before making any connections.
If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from
the tuner and radio.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the speakers may
be damaged.
Warning
Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the DIGITAL AUDIO jack of this DVD player
to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as well as the speakers.
(Refer to "Selecting Digital Audio Output" on page 23.)
To S-VIDEO OUT
WER IN
S-VIDEO OUT
To Analog
Audio out (L/R)
COMPOSITE
VIDEO OUT VIDEO OUT
OPTICAL
UDIO OUT UDIO OUT
Tv composite
Video out if not
using S-video cable.
Audio/Video cable
To Composite
video input
To audio inputs
13
S-video cable
(supplied)
To S-Video input
TV or monitor with
audio/video inputs
Audio System