TECHWOOD DVDC-95 Owner's Manual page 12

Connecting directly to a TV
Connect the DVD player to your TV
To S-VIDEO OUT
For the best picture, If
the TV has an S-video
input, connect the DVD
player with the S-video
cable otherwise, use the
composite video out jack.
Notes
Refer to the owner's manual of your TV as well.
When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any con-
nections.
Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video
discs are copy protected.
Warning
Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the DIGITAL AUDIO jack of this DVD player
to an AV decoder that has the Dolby Digital (AC-3) decoding function. High volume sound may damage your hearing as well as the speakers.
(Refer to "Selecting Digital Audio Output" on page 23.)
WER IN
S-VIDEO OUT
To Analog
Audio out(L/R)
S-video cable (supplied)
To S-VIDEO INPUT
COMPOSITE
VIDEO OUT
OPTICAL ANALOG
UDIO OUT
To Composite Video out
If not using S-video cable
To composite video input
To audio inputs
12
TV or monitor with
audio/video inputs