Removing The Unit; Fastening The Front Panel - Pioneer DEH-P6200BT Operation Manual

Installation
2. Tighten two screws on each side.
Factory radio mounting bracket
• Use either truss (5 mm × 8 mm) or flush
surface (5 mm × 9 mm) screws, depending
on the bracket screw holes.

Removing the Unit

1. Extend top and bottom of the trim
ring outwards to remove the trim
ring. (When reattaching the trim
ring, point the side with the groove
down.)
• Releasing the front panel allows easier access
to the trim ring.
2. Insert the supplied extraction keys
into both sides of the unit until
they click into place.
Screw
Dashboard or Console
Trim ring
3. Pull the unit out of the dashboard.

Fastening the front panel

If you do not plan to detach the front panel,
the front panel can be fastened with supplied
screw.
English
Screw