Phone Menu Operation - Pioneer DEH-P6200BT Operation Manual

(setting a special device)
Bluetooth devices that are difficult to establish a con
nection with are called special devices. If your Blue
tooth device is listed as a special device, select the
appropriate one.
1 Press
to display the setting mode.
2 Use
to select a special device.
Turn to change the menu option. Press to select.
! If five devices are already paired,
is displayed and it is not possible to perform
this operation. In this case, delete a paired de
vice first.
3 Turn
to display this unit's device name, BD
address and pincode.
4 Use a cellular phone to connect to this unit.
! To complete the connection, check the device
name (
on your cellular phone.
! PIN code is set to
can change this code. Refer to
code input) on the previous page.
(connecting to a Bluetooth device auto
matically)
1 Press
to turn automatic connection on or
off.
(setting the visibility of this unit)
To check the availability of this unit from other de
vices, Bluetooth visibility of this unit can be turned
on.
1 Press
to turn the visibility of this unit on or
off.
! While setting
lity of this unit is turned on temporarily.
(PIN code input)
) and enter the link code
as the default. You
(PIN
, Bluetooth visibi
To connect your cellular phone to this unit via Blue
tooth wireless technology, you need to enter a PIN
code on your phone to verify the connection. The de
fault code is , but you can change it with this
function.
1 Press
to display the setting mode.
2 Push
up or down to select a number.
3 Push
right to move the cursor to the next po
sition.
4 After inputting PIN code, press and hold
PIN code can be stored in memory.
! After inputting 8 digits PIN code, push
right to store in memory.
! After inputting, pushing
returns you to the PIN code input dis
play, and you can change the PIN code.
(BD (Bluetooth device) address display)
1 Press
to display the setting mode.
2 Push
left to switch to the BD address.
Pushing right returns to the device name.
Important
Be sure to park your vehicle and apply the park
ing brake when performing this operation.
After selecting, perform the following proce
dures to set the function.
(missed call history)
(dialed call history)
'
(received call history)
1 Press
to display
history),
'
(received call history).
2 Turn
to select a name or phone number.
3 Press
to make a call.
4 When you find a phone number that you want to
store in memory, press and hold one of the preset
tuning buttons ( to ).
! Press one of preset buttons
desired preset number.
right or pressing
(missed call
(dialed call history) or
to to recall the
En
02
17