P [Protect] - Panasonic LUMIX DMC-LX3 Operating Instructions Manual

Advanced (Playback)
You can set protection for pictures you do not want to be deleted by mistake.
1 Select [PROTECT] on the [PLAYBACK] mode menu.
2
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
3
Select the picture, and then
press [MENU/SET].
When [MULTI] has been selected
Repeat these steps for each picture.
•
The settings are cancelled when [MENU/
•
SET] is pressed again.
4
Press [‚] to return to the menu screen.
Press [MENU/SET] to close the menu.
•
∫ Cancelling all the [PROTECT] settings
1 Select [CANCEL] on the screen shown in step
2 Press 3 to select [YES] and then press [MENU/SET].
3 Press [MENU/SET] to close the menu.
If you press [MENU/SET] while cancelling protection, the cancelling will stop halfway.
•
Note
The protect setting may not be effective on other equipment.
•
Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
•
memory or the card is formatted.
Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they
•
cannot be deleted when the card's Write-Protect switch is set to [LOCK].
110
VQT1T39

P [PROTECT]

[SINGLE]
Press 2/1 to select
the picture.
2
(P23)
[MULTI]
Press 3/4/2/1 to
select the pictures.
and then press [MENU/SET].