Table of Contents
Advertisement
Using the [Rec] Mode Menu
[Flash]
Applicable modes:
For details on [Rec] Mode menu settings, refer to P36.
Set the flash to match the recording.
[‡]
([Auto])
[
] ([Auto/Red-Eye])
([Forced Flash
[‰]
On])
([Forced On/
[
]
Red-Eye])
¢
([Slow Sync./
[
]
Red-Eye])
¢
([Forced Flash
[Œ]
Off])
¢ The flash is activated twice. The subject should not move until the second flash is
activated. Interval until the second flash depends on the brightness of the subject.
[Red-Eye Removal]
flash icon.
Recording
The flash is automatically activated when the recording conditions
make it necessary.
The flash is automatically activated when the recording conditions
make it necessary.
It is activated once before the actual recording to reduce the
¢
red-eye phenomenon (eyes of the subject appearing red in the
picture) and then activated again for the actual recording.
•
Use this when you take pictures of people in low lighting
conditions.
The flash is activated every time regardless of the recording
conditions.
•
Use this when your subject is back-lit or under fluorescent
light.
If you take a picture with a dark background landscape, this
feature will slow the shutter speed when the flash is activated so
that the dark background landscape will become bright.
Simultaneously it reduces the red-eye phenomenon.
•
Use this when you take pictures of people in front of a dark
background.
The flash is not activated in any recording conditions.
•
Use this when you take pictures in places where the use of
the flash is not permitted.
(P91)
on the [Rec] Mode menu is set to [On], [
- 73 -
] appears on the
Advertisement
Table of Contents
