Taking Pictures Using The Automatic Function (Intelligent Auto Mode) - Panasonic LUMIX DMC-LX3 Operating Instructions Manual

Programme shift is cancelled if the camera is turned off or the joystick is moved up and down
•
until the programme shift indication disappears.
∫ Example of programme shift
(A): Aperture value
(B): Shutter speed
1 Programme shift amount
2 Programme shift line chart
3 Programme shift limit
Note
If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
•
and shutter speed turns red.
Programme shift is cancelled and the camera returns to normal programme AE mode if more
•
than 10 seconds pass after programme shift is activated. However, the programme shift setting
is memorised.
Depending on the brightness of the subject, programme shift may not be activated.
•
ñ
[REC] mode:
Taking pictures using the automatic function
( : Intelligent Auto Mode)
ñ
The camera will set the most appropriate settings to match the subject and the recording
conditions so we recommend this mode for beginners or those who want to leave the
settings to the camera and take pictures easily.
The following functions are activated automatically.
•
Scene detection/[STABILIZER]/[INTELLIGENT ISO]/Face detection/[QUICK AF]/
–
[I.EXPOSURE]/Digital Red-eye Correction/Backlight Compensation
1 Slide the [REC]/[PLAYBACK]
selector switch to [!].
A Mode dial
B [REC]/[PLAYBACK] selector switch
2
Set the mode dial to [ñ].
[MF] cannot be set in [
•
(A)
ñ ] (P60).
1 2 3 4 5 6 7
2
2.8
4
5.6
8
11
1 1 / 2 1 / 4 1 / 8 1 / 15 1 / 30 1 / 60 1 / 125 1 / 250 1 / 500 1 / 1000 1 / 2000
(B)
Basic
8 9 10 11 12 13 14
VQT1T39
37