Troubleshooting - Panasonic LUMIX DMC-LX3 Operating Instructions Manual

[ROTATE DISP.] (P107)
[FAVORITE] (P108)
[DPOF PRINT] (P108)
PRINT WITH DATE
[AUDIO DUB.] (P111)
∫ Functions that cannot be used when the component cable is connected
[LCD MODE]/[HISTOGRAM]/[TITLE EDIT]/[TEXT STAMP]/[RESIZE]/[TRIMMING]/
[LEVELING][ASPECT CONV.]/[AUDIO DUB.]/[COPY]/[MULTI] settings of [DPOF PRINT]/
[MULTI] settings of [PROTECT]/[DELETE MULTI]/Creation of still pictures from motion
pictures

Troubleshooting

First, try out the following procedures (P137–144).
If the problem is not resolved, it may be improved by selecting [RESET]
[SETUP] menu when taking pictures.
The camera cannot be operated even when it is turned on.
The battery is not inserted correctly.
•
The battery is exhausted.
•
Charge the battery.
•
The LCD monitor turns off while the camera is turned on.
Is the [EXT. VIEWFINDER]
•
> Press [DISPLAY] to switch to the LCD monitor.
Is [AUTO LCD OFF]
•
> Press the shutter button halfway to cancel these modes.
The battery is exhausted.
•
Charge the battery.
•
The camera turns off immediately after it is turned on.
The battery is exhausted.
•
Charge the battery.
•
If you leave the camera on, the battery will be exhausted.
•
> Turn the camera off frequently by using the [ECONOMY] mode etc.
The [CHARGE] lamp flashes.
Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to
•
charge the battery or charging may remain incomplete.
Are the terminals of the charger or battery dirty?
•
Multi playback
•
[CALENDAR]
•
When [QUALITY] is set to [
•
When set to [
•
Pictures stamped with [TEXT STAMP]
•
Motion pictures
•
Protected pictures
•
When [QUALITY] is set to [
•
Battery and power source
(P19)
(P91) set to [ON]?
(P28) of the [ECONOMY] mode active?
]
]
], [ ] or [ ]
(P29) on the
(P28)
VQT1T39
Others
137