Taking Pictures Using Burst Mode - Panasonic LUMIX DMC-LX3 Operating Instructions Manual

Advanced (Recording pictures)
The exposure may not be compensated with auto bracket depending on the brightness of the
•
subject.
When auto bracket is set, the flash is [Œ].
•
When auto bracket/multi aspect is set, burst mode and [MULTI FILM]
•
be cancelled.
In shutter-priority AE and manual exposure, if the shutter speed is set to more than 1 second
•
auto bracket is disabled.
The one set last will take precedence. (auto bracket and multi aspect cannot be set
•
simultaneously.)
[REC] mode:

Taking Pictures using Burst Mode

Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Press [ ˜/‚ ] to display the burst mode selection
1
menu, and then press 3/4 to select the burst
mode.
A [˜ /‚]button
Press [MENU/SET].
2
You can also press the shutter button halfway to finish.
•
The menu screen disappears after about 5 seconds. At this
•
time, the selected item is automatically set.
Take a picture.
3
Hold down the shutter button fully to activate the burst mode.
•
Burst speed (pictures/
second)
Number of
recordable
pictures
¢ The burst speed is constant regardless of the transfer speed of the card.
56
VQT1T39
[OFF]
—
—
A
—
›
—
—
—
˜
¢
2.5
max. 4
Depends on the
remaining capacity of the
built-in memory/card.
max. 8
max. 3
(P78) settings will
ò
approx. 2
max. 3