Í [Pet]; Ï [Sunset] - Panasonic LUMIX DMC-FZ28 Operating Instructions Manual

∫ Birthday/Name setting
1 Press 3/4 to select [AGE] or [NAME] and then press 1.
2 Press 3/4 to select [SET] and then press [MENU/SET].
3 Enter the birthday or name.
Birthday:
2/1: Select the items (year/month/day).
3/4: Setting.
[MENU/SET]: Exit.
Name: For details on how to enter characters, read the [TITLE EDIT] section on P103.
When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
•
If [ON] is selected when the birthday or name has not been registered, the setting screen
•
appears automatically.
4 Press [MENU/SET] to finish.
∫ To cancel [AGE] and [NAME]
Select the [OFF] setting in step
Note
The age and name can be printed out using the "PHOTOfunSTUDIO-viewer-" bundled software
•
on the CD-ROM (supplied).
If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
•
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.
•
[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].
•
If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
•
lower left of the screen for about 5 seconds, along with the current date and time.
If the age is not properly displayed, check the clock and birthday settings.
•
If the quality is set to [
•
pictures.
The birthday setting and name setting can be reset with [RESET].
•
The initial setting for [AF MODE] is [š].
•
Select this when you want to take pictures of a pet such as a dog or a cat.
You can set your pet's birthday and name. You can select to have these appear at the time
of playback, or have them stamped on the recorded image using [TEXT STAMP] (P104).
For information about [AGE] or [NAME], refer to [BABY1]/[BABY2] on P70.
Note
The initial setting for the AF assist lamp is [OFF].
•
The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to ¶.
•
[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO800].
•
The initial setting for [AF MODE] is [
•
Refer to [BABY1]/[BABY2] for other information about this mode.
•
Select this when you want to take pictures of sunset view. This allows you to take vivid
pictures of the red colour of the sun.
2
of the "Birthday/Name setting" procedure.
] or [ ] and pictures are taken, the name is not registered on the
í [PET]
].
ï [SUNSET]
Advanced (Recording pictures)
VQT1S48
71