Panasonic LUMIX DMC-FZ28 Operating Instructions Manual page 52

Advanced (Recording pictures)
In advance scene modes
•
those described above.
in mode
•
in mode
•
, and
•
:, ; and í in [SCENE MODE]
•
in mode
•
in mode
•
in mode
•
and in
•
in mode
•
in [SCENE MODE] (in shutter speed priority)
•
5 in [SCENE MODE]
•
4 in [SCENE MODE]
•
¢2 The shutter speed becomes a maximum of 1 second in the following cases.
When the optical image stabilizer is set to [OFF].
–
When the camera has determined that there is little jitter when the optical image stabilizer is
–
set.
¢3 The maximum shutter speed is selected when the amount of jitter is minimal while
[STABILIZER] is set or when [STABILIZER] is set to [OFF].
It will become 1 to 1/2000th of a second in other advanced scene modes and scene modes.
•
Note
Do not bring the flash too close to objects or close the flash while it is activated. The
•
objects may be discoloured by its heat or lighting.
Do not close the flash soon after the flash is activated prior to taking pictures due to AUTO/
•
Red-eye reduction etc. It causes a malfunction.
When you take a picture beyond the available flash range, the exposure may not be adjusted
•
properly and the picture may become bright or dark.
When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
•
when you press the shutter button fully. When [AUTO LCD OFF] is set, the LCD monitor
turns off and the power lamp lights.
The white balance may not be properly adjusted if the flash level is insufficient for the subject.
•
When the shutter speed is fast, the flash effect may not be sufficient.
•
When taking a picture with the flash, we recommend removing the lens hood. In some
•
cases it may not allow the scene to be illuminated properly.
It may take time to charge the flash if you repeat taking a picture. Take a picture after the
•
access indication disappears.
The red-eye reduction effect differs between people. Also, if the subject was far away from the
•
camera or was not looking at the first flash, the effect may not be evident.
Flash is fixed to [Œ] when the [CONVERSION]
•
52
VQT1S48
(P66) and [SCENE MODE] (P69), the shutter speeds will differ from
Mode
in mode
mode
Shutter speed (Sec.)
1/8 to 1/2000th
1 or 1/4 to 1/2000th
8 to 1/2000th
15, 30, 60
¢3
1/4, 2
(P95) is set to [ ] or [
¢2
].
C