B) Mains Lead Release; C) On/Off Switch; D) Handle Lock / Release By Foot Pedal - Panasonic MC-E4063K Operating Instructions Manual

B) MAINS LEAD
1 1
Wrap the mains lead around the upper
and lower cord hooks and push the mains
plug under the lead.

D) HANDLE LOCK / RELEASE BY FOOT PEDAL

1 1
Release the handle by pressing down on the handle release pedal with your foot and
pulling back and down on the handle with your hand.
E) CARPET/BARE FLOOR SELECTOR
1 1
Carpet/Bare
Floor Selector
Selector should be placed in BARE
FLOOR (TOOLS) position when using
vacuum cleaner on bare floors and
when using tools.
NOTE: The beater bar does not rotate
in the BARE FLOOR (TOOLS) posi-
tion.
1 2
Quick Release
Cord Hook
Turn the upper cord hook to release the
mains lead.
1 2
Step a second time
1 2
To Clean Bare Floor
Or Use Tools
The beater bar does not rotate in the
BARE FLOOR (TOOLS) position.
NOTE: For longer belt life, turn vacu-
um cleaner off before moving selector.
CAUTION: Failure to do so
can cause belt to rub on
selector shaft and result in
belt becoming hot and cre-
ating a burning rubber
smell.

C) ON/OFF SWITCH

On-Off
Switch
To start or stop the vacuum cleaner,
push the switch button to 'I' to turn ON
and to 'O' to turn OFF.
CAUTION: To prevent dam-
aging carpeted floors, tiled
floors, linoleum, etc. Do not
leave the beater bar rotat-
ing in the same place for
too long.
NOTE: After use, unplug from the
socket and store the vacuum cleaner
in the upright position.
1 3
To Clean Carpet
Selector should be placed in CARPET
position when using vacuum cleaner on
carpeted floors.
CAUTION: To prevent dam-
aging carpeted floors, tiled
floors, linoleum, etc. Do not
leave the beater bar rotat-
ing in the same place for
too long.
NOTE: After use, unplug from the
socket and store the vacuum cleaner
in the upright position.