Advertisement
Turn the quick release upper cord hook to either side
and down to release the mains lead.
Detach the plug from the mains lead and pull the
cord off the quick release upper cord hook.
Release the handle by pressing down on the foot pedal
with your foot and pulling back and down on the handle
with your hand.
Selector
Window
OFF/FLOOR/
CARPET
Switch
Cord Clip
Mains Lead
Be sure the mains lead is locked under the cord clip
on the rear of the handle.
Plug the mains lead into a 240 Volt mains socket
located near the floor.
After use, unplug the mains lead from the
socket and store the vacuum cleaner in the upright
(vertical) position.
Turns both suction and agitator motors off.
Turns on the suction motor only. In this
position the agitator assembly does not revolve.
Use this setting for cleaning hardwood and tile floors
and when any attachments (tools) are used.
Turns on both the suction and the
agitator motors.
-7-
Advertisement
