Advertisement
The HEPA exhaust filter must be replaced when
dirty. It should be replaced regularly depending on
use conditions.
will lose its dust trapping ability.
exhaust filter number.
Remove exhaust filter cover by pressing the release
tab on the cover and rotating out from vacuum
cleaner.
Secondary
Filter
Dust Bag
Removed For Clarity
Press
Filter
Cover
Release
Tab
be washed as it
(page 21) for the
Place Seal Side
Against Vacuum
Cleaner Body
Exhaust
Filter
1
Exhaust
Filter Cover
Remove the filter cartridge from cover.
Place new filter cartridge into cover making sure that
airflow arrow on side of cartridge points into cover.
Place foam seal of filter against the vacuum cleaner
body.
Replace the exhaust filter cover by placing bottom
tabs in slots and rotating in until cover snaps into
place.
Check secondary filter frequently and clean when
dirty.
If the secondary filter, located in the bottom of the dust
bag chamber, is dirty, remove it by pulling forward out
from under the ribs.
Wash the foam filter in warm soapy water, rinse and dry
thoroughly by squeezing the filter in your hand and
letting it air dry.
wash in the dishwasher.
install damp.
use vacuum cleaner without secondary filter
and dust bag.
Replace the secondary filter by sliding it back into place
under the ribs in the dust bag chamber.
-14-
2
Advertisement
