Advertisement
End Cap
Belt Path
Agitator
New Brushes
Worn Brushes
Base
Support
Bar
End Cap
-17-
In order to keep cleaning efficiency high and to
prevent damage to your vacuum cleaner, the agitator
must be cleaned every time the belt is changed.
The agitator must also be cleaned according to the
following schedule:
-
(used daily)
-
(used 2-3 times/week)
-
(used 1 time/week)
Check and remove hair, string and lint build-up
frequently in the nozzle agitator and end cap areas.
Remove any dirt or debris in the belt path area or in
the brush roller area.
Carefully remove any string or debris located on the
agitator or end caps.
When brushes are worn to the level of the base support
bars, replace the agitator assembly.
Remove nozzle cover, belt and agitator assembly. See
16).
Replace agitator assembly.
Reinstall belt and nozzle cover. See
page 18).
every week
every month
every 2 months
page
Advertisement
