Advertisement
Before contacting your Panasonic service centre, check the following points:
Failure to correctly maintain your product, for example regular cleaning and unblocking, may result in a charge
if referred to a service agent for attention.
Vacuum cleaner won't run.
Poor job of dirt pick-up.
Vacuum cleaner picks up
moveable rugs or pushes too
hard.
Agitator does not turn.
Sound changes.
1. Unplugged at mains socket.
2. Tripped circuit breaker replace
at household service panel.
3. Thermal protector tripped.
4. Defective mains socket.
1. Full or clogged dust bag.
2. Wrong pile height setting.
3. Worn agitator.
4. Clogged nozzle or bag holder.
5. Motor protection system
activated.
6. Dirty secondary filter and/or
exhaust filter.
1. Wrong pile height setting.
1. Handle in full upright position.
2. Belt protector tripped.
1. New carpet fuzz clogged air path. 1. See
-19-
1. Plug in firmly, select the desired
setting on the touch control.
2. Reset circuit breaker or fuse.
3. Allow vacuum cleaner to cool
40-50 minutes. (page 6)
4. Check with a good appliance
or lamp. Have socket properly
serviced.
1. Change bag. (page 13)
2. Adjust setting. (page 8)
3. Replace agitator. (page 17)
4. See
5. Check for clogs. (page 15)
6. Clean or change filters.
(page 14)
1. Adjust setting. (page 8)
1. Move handle from upright
position.
2. Reset belt protector. (page 6)
2. See
. (page 15)
(page 6).
(page 15).
Advertisement
