Advertisement
Tempest Manual 4.0
6/8/99
11:18 AM
a
TIME
In TIME mode, you can set and
view the time and calendar
information for two time zones.
You can also set a confirmation
tone which sounds at the
press of any button. To easily
distinguish the TIME mode,
T IME
this tone is different than
the tone for other modes.
D AY / MO N T H DAT E
Set time and calendar information
1 In TIME mode, press and hold the ADJUST button for
two seconds.
The second designator blinks. Note that the adjustable
element is always blinking. If no buttons are pressed for
2-3 minutes, the watch will exit ADJUST and return to
TIME mode.
2 Press START/STOP button.
Under thirty seconds the value resets to zero. If over
thirty seconds, minutes advance.
Page 6
6
A D J U S T
STA RT/ STOP
M O D E
SPLIT/ RESET
ELEC TR OLI TE
3 Press SPLIT/RESET button to advance to next programmable
element.
The minutes begin blinking.
4 Press START/STOP button to advance the blinking element.
Press once to advance one minute. Hold down for quick
advance.
5 Repeat steps 3 and 4 until you have properly set all
elements: seconds, minutes, hours, day, month, year, 24
or 12-hour clock, and day/date or month/date display.
6 Press the ADJUST button to save changes.
Time is set and no elements are blinking.
7
Advertisement
