Taking Pictures That Match The Scene Being Recorded (Scene Mode) - Panasonic LUMIXDMC-FX100 Operating Instructions Manual

Taking pictures that
match the scene being
recorded
(Scene mode)
When you select a scene mode to match the
subject and recording situation, the camera
sets the optimal exposure and hue to obtain
the desired picture.
• Refer to P53 to 64
information " for details about each scene
mode.
1 Press 1 for the [SCENE MODE]
menu.
2 Press 3/4/2/1 to select the scene
mode.
• Press 4 at A to switch to the next menu
screen.
• You can switch menu screens from any
menu item by rotating the zoom lever.
3 Press [MENU/SET] to set.
• The menu screen is switched to the
recording screen in the selected scene
mode.
Advanced (Recording pictures)
and "About the
A
• Press [MENU/SET] and then perform
1 2
steps ,
mode.
∫ About the information
• If you press [DISPLAY] when selecting a
scene mode in step
each scene mode are displayed. (If you
press [DISPLAY] again, the screen returns
to the [SCENE MODE] menu.)
• Refer to P45
shutter speed.
• The flash setting is memorised even if the
camera is turned off. However, the scene
mode flash setting is reset to the initial
setting when the scene mode is changed.
• When you take a picture with a scene mode
that is not adequate for the purpose, the hue
of the picture may differ from the actual
scene.
• If you press 2 when selecting [PORTRAIT]
or [HI-SPEED BURST] in step
[SCENE MODE] menu [
you then select either the [REC] menu [
or the [SETUP] menu [ ], you can set the
desired items.
• The following items cannot be set in scene
mode because the camera automatically
adjusts them to the optimal setting.
– [SENSITIVITY]
– [METERING MODE]
– [COL.EFFECT]
– [PICT.ADJ.]
- 52 -
3
and to change the scene
2
, explanations about
for information about the
2
, the
] is selected. If
]