To Record Special Cds And Tracks - Panasonic SC-AK78 Operating Instructions Manual

2
1
1
2
3
4
5
Recording from compact discs
3

To record special CDs and tracks

(CD Manager function)
This function makes it easier for you to select special CDs and tracks
from amongst those loaded in the player.
4
• While recording, if a track is cut off in the middle at the end of the
front side, it is re-recorded from the beginning on the reverse side.
5
Front side
Reverse side
The interrupted track is re-recorded in its entirety on
the reverse side.
• At the end of the reverse side recording stops and the current track
will be interrupted.
Preparation:
1. Insert the tape to be recorded on into deck 2.
Tape direction is automatically set to "
Change the tape direction if you want to start recording from the
reverse side. (
2. Insert the CD.
1. Press [CD].
2. Press [CD MANAGER] to select the desired
mode.
Every time you press the button;
1-TRACK
1-TRACK: Only one particular track is recorded.
1-DISC:
1-ALL:
(NORMAL: The original display is restored in about 3 seconds.)
3. Press [CD 1] – [CD 5] to select the disc.
Note
This step is not required if 1-ALL was selected in step 2.
4. Press [
track.
Note
This step is not required if 1-DISC was selected in step 2.
5. Press [
To stop recording
• To add a 4 second silent interval before stopping
Press [ ]. The CD will automatically stop too.
• To stop recording without a silent interval
Press [ REC/STOP]. The CD will stop automatically too.
".
page 22)
1-DISC 1-ALL NORMAL (OFF)
The tracks on only one particular disc are recorded.
The same track numbers on each of the CDs are re-
corded in succession.
] or [ ] to select the desired
REC/STOP] to start recording.
25
RQT5289