Storing Tv Broadcasts In Your Vcr - Panasonic NV-SJ407EE Operating Instructions Manual

Storing TV Broadcasts in Your VCR

The VCR is fitted with its own tuner (just like a normal TV)
and can be preset to receive up to 99 TV broadcast stations.
Plug in Auto Tuning
When the VCR is turned on after connecting the aerial cable
and the mains lead, Auto Tuning starts.
On Screen Display
Auto tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position.
≥ If you turn the VCR off during Auto Tuning, Auto Tuning will
stop halfway.
≥ If the VCR starts playback during Auto Tuning, Auto Tuning
will stop halfway.
To Cancel Auto Tuning Mid-Operation:
Press the MENU button
is cancelled.
To Restart Plug in Auto Tuning:
1 Press the EJECT button
cassette.
2 Keep the Channel buttons
simultaneously for 3 seconds or more during the VCR on.
≥ The channel displayed on the VCR display disappears
for a moment then changes to 1.
3 Disconnect the mains lead and then reconnect it.
4 Turn off the VCR and then turn it on.
≥ Auto Tuning commences.
If Auto Tuning stops halfway by turning the VCR off,
playback or a power failure:
1 Disconnect the mains lead and then reconnect it.
2 Turn off the VCR and then turn it on.
≥ Auto Tuning commences.
10
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 2 SEARCH µ 21
END: MENU
during Auto Tuning. Auto Tuning
and remove the video
on the VCR pressed
VCR display
Disappears 1
Auto Tuning Using the On Screen Display
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should
be performed according to the following method if necessary.
Preparations
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Turn on the VCR and select any programme position
except A1 or A2.
Operations
1 Press the MENU button
display the Main menu on
the TV screen.
2 Press the Cursor buttons (34
to select "TUNER PRESET" then
press ENTER button
3 Press the Cursor buttons (34
to select "AUTO TUNE" then press
the Cursor buttons (2 1
2 1 2 1) 2 1
2 1
start the Auto Tuning.
≥ When Auto Tuning is
completed, the On Screen
Display disappears and
programme position 1 is
selected.
Channels that can be Received
SYSTEM
B CCIR STD
E2–E12
G (B.G.H)
Hong Kong
Special
Administrative
I
Region of China,
UK (I)
D EAST EUROPE
R1–R12 44–470 MHz E21– E69
K (D.K.K1)
Notes:
≥ Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
≥ Auto Tuning takes five or more minutes to complete its
search.
≥ If the VCR is not correctly tuned by Auto Tuning, follow the
procedure on the next page.
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
to
CH ADD&DELETE
SYSTEM
OPTION
SELECT : ,ENTER
END :MENU
MENU
LANGUAGE
CLOCK SET
34 34) 34 34 TUNER PRESET
CH ADD&DELETE
SYSTEM
OPTION
.
SELECT : ,ENTER
END :MENU
TUNER PRESET
CH 1
CLEAR
34 34 34 34)
AUDIO SYSTEM
COLOUR SYSTEM
AUTO TUNE
SEARCH
to FINE
END :MENU
SELECT:
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1 SEARCH
The number displayed here is
the number of channels still to
be auto tuned.
VHF CATV
S01–S05
M1–M10
E21–E69
U1–U10
S21–S41
– – E21– E69
(OFF)
(DK)
(AUTO)
(3)
100
END: MENU
UHF