Storing Tv Broadcasts In Your Vcr - Panasonic NV-SJ500 Series Operating Instructions Manual

Storing TV Broadcasts in Your VCR

The VCR is fitted with its own tuner (just like a normal TV) and
can be preset to receive up to 99 TV broadcast stations.
Plug in Auto Tuning
When the VCR is turned on after connecting the aerial cable
and the mains lead, Auto Tuning starts.
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 22
Auto tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position.
≥ If you turn the VCR off during Auto Tuning, Auto Tuning will
stop halfway.
≥ If the VCR starts playback during Auto Tuning, Auto Tuning
will stop halfway.
To Cancel Auto Tuning Mid-Operation:
Press the MENU button during Auto Tuning. Auto Tuning is
cancelled.
To Restart Plug in Auto Tuning:
1 Press the EJECT button
cassette.
2 Keep the Channel button
simultaneously for 3 seconds or more during the VCR on.
≥ The channel displayed on the VCR display disappears
for a moment then changes to 1.
3 Disconnect the mains lead and then reconnect it.
4 Turn off the VCR and then turn it on.
≥ Auto Tuning commences.
If Auto Tuning stops halfway by turning the VCR off,
playback or a power failure:
1 Disconnect the mains lead and then reconnect it.
2 Turn off the VCR and then turn it on.
≥ Auto Tuning commences.
SEARCH 21
END: MENU
and remove the video
on the VCR pressed
Disappears 1
Auto Tuning Using the On Screen Display
Introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should be
performed according to the following method if necessary.
Preparations
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Turn on the VCR and select any programme position except
A1 or A2.
Operations
1 Press the MENU button
display the Main menu on
the TV screen.
2 Press the Cursor buttons (34
to select "TUNER PRESET" then
press ENTER button .
3 Press the Cursor buttons (34
to select "AUTO TUNE" then press
the Cursor buttons (2 1
2 1 2 1 2 1 2 1)
start the Auto Tuning.
≥ When Auto Tuning is
completed, the On Screen
Display disappears and
programme position 1 is
selected.
Channels that can be Received
SYSTEM VHF
B CCIR Standard
E2– E12
G (B.G.H)
Hong Kong
Special
Administrative
I
Region of China,
UK (I)
East Europe
R1– R12
(D.K.K1)
D
K
CHINA°
C1– C12
(D)
°
For NV-SJ500AM/AMC/AMM/508AMJ
Notes:
≥ Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
≥ Auto Tuning takes five or more minutes to complete its
search.
≥ If the VCR is not correctly tuned by Auto Tuning, follow the
procedure on the next page.
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
to SYSTEM
OPTION
SELECT : ,ENTER
END :MENU
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
34 34
34 34)
SYSTEM
OPTION
SELECT : ,ENTER
END :MENU
TUNER PRESET
CH 1
CLEAR (OFF)
AUDIO SYSTEM (BGDK)
34) 34 34 34
COLOUR SYSTEM (AUTO)
AUTO TUNE
SEARCH
FINE
to
END :MENU
SELECT:
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
CH 1 SEARCH
END: MENU
The number displayed here is
the number of channels still to
be auto tuned.
CATV UHF
S01– S05
M1– M10
E21–E69
U1– U10
S21– S41
– – E21–E69
44– 470MHz E21–E69
Z1–Z35 C13–C57
(3)
100
9