Step 4 Preparing The Remote Control; Step 5 Easy Setup - Panasonic SC-XH10 Operating Instructions Manual

step 4 Preparing the remote control
Batteries
Insert so the poles (r and j) match those in the remote control.
R6/LR6, AA
Replace the cover.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
≥ Use alkaline or manganese batteries.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Do not:
≥ mix old and new batteries.
≥ use different types of batteries at the same time.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Use
Aim at the remote control signal sensor (
Distance: Within approx. 7 m
Angle: Within approx. 20° up and down, approx. 30° to the left and right
8
8
Press in and lift up.
4), avoiding obstacles.
step 5 Easy setup
The Easy setup screen assists you in making necessary
settings.
Preparation
Turn on your TV and select the appropriate video input mode
(e.g. VIDEO 1, AV 1, etc.) to suit the connection to this unit.
≥ To change your TV's video input mode, refer to its operating
instructions.
≥ This remote control can perform some basic TV operations (
1
Press [Í]1 to turn on the unit.
≥ The Easy setup screen appears automatically.
2
Press [3, 4]8 to select "Yes" and press [OK]8.
3
Follow the messages and make the settings with
[3, 4, 2, 1]8 and [OK]8.
≥Language
Select the language used on menu screen.
≥TV aspect
Select the aspect to suit your TV.
≥Speaker layout
Select "Surround layout (Recommended)" mode or "Front layout
(Alternative)" mode according to your speaker layout (
Positioning).
≥Speaker check
Listen to speaker output to confirm speaker connections.
≥Speaker output
Make surround sound setting for speaker output.
4
Press [OK]8 to finish the "Easy setup".
You can perform this setup anytime by selecting "Easy setup" in the Setup
menu. ( 15)
4).
6,