Step 2: Preparing The Speakers - Panasonic SC-BTT195 Operating Instructions Manual

STEP 2: Preparing the speakers

Assembling the front speakers
[BTT195]
1
Attach the stand to the base.
3
Attach the speaker.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Connecting the speaker cables
Attach the speaker cable sticker (supplied) and connect the speaker cables to the speakers.
e.g., Surround speaker
Connector
Speaker cable sticker (supplied)
Speaker indication
Speaker cable sticker
1 FRONT Lch 1
2 FRONT Rch 2
3 SURROUND Lch 3
4 SURROUND Rch 4
5 CENTER 5
6 SUBWOOFER 6
Thread the speaker
cable through the
base.
Leave the
space of
about 80 mm.
SURROUND
Lch
Connector
WHITE
RED
BLUE
GREY
GREEN
PURPLE
2
Tighten the 3 screws (supplied) securely.
Slide the speaker cable into the
groove.
4
Tighten the screw (supplied) securely.
Push
r: White
s: Blue line
13
VQT4A16