Samsung SMO-150QP User Manual page 27

7. Adjust the direction of the lens.
1) Use the cross (+) screw driver to turn the screw (indicated by the arrow in the illustration)
counterclockwise slightly.
The lens body will move.
2) Tilt the lens body down about 10° from the horizontal, and then turn the screw clockwise to
fasten it.
8. Assemble the assy-case front onto the caserear as shown in the illustration. Fasten the assy-case
front to the case-rear with the screw (BH M2.6) you removed earlier.
CASE-REAR
Screw (BH M2.6) ASSY-CASE FRONT
English-27
Screw