Advertisement
10" B-Vent
NOT
INCLUDED
Item #3 Gas
Vent Draft
Hood
Connector)
Item #2,
Chimney Safety
Flap
Item #1
NEW Chimney
Base
B‐Vent Chimney
Chimney Assembly
The Fire Rock fireplace kit includes a
chimney base which must be discarded and
replaced with the chimney base from the
Fire Rock 14000 Series pallet (item #1,
NEW Chimney Base).
The next step involves two (2) parts from
the 14000 Series pallet (Item #2, Chimney
Safety Flap and Item #3 Gas Vent Draft
Hood Connector) Place the Chimney
safety flap into the recess on the top of the
NEW Chimney Base, hold the flap open
and insert the Draft Hood Connector into
the hole. Secure with 3 concrete screws.
At this point please follow the instructions
provided by the specific B-vent chimney
you have chosen.
Advertisement
