Assigning Key 1 For Fast Access To The Answer Machine (Network Mailbox); Locating A Handset ("Paging"); De-Registering Handsets - Siemens Gigaset AS280 User Manual

Setting a different language
You can change the language used for voice
prompts and the pre-recorded announcement.
¢
MENU 4 3 9 2 1 (starts the procedure).
Select the language:
(English), (French),
0 1
The display shows
Saved
Assigning key 1 for fast access to the
answer machine (network mailbox)
Simply press and hold key
you will be connected directly to the answer
machine (network mailbox).
¢
See Menu tree page 15.
Remote operation when on the move
You can check and activate your answer machine
from any other telephone (hotel, pay phone etc.).
Requirements:
◆
You have set a system PIN other than 0000
¢
page 16.
◆
The phone you are using for remote operation
has touch tone dialling (DTMF), i.e. you hear
different tones when you press the keys.
Calling the answer machine and playing back
messages
~
(Dial your own number)
your announcement: press the
system PIN
The following keys are used for operation:
A
Go to the start of the current message.
Press twice to go back to the previous
message.
B
Stop playback. Press again to resume.
3
Skip to next message.
0
delete current message.
Activating the answer machine
~
(Enter your own number and allow the phone to
ring until you hear the message: "Please enter PIN")
¢
~
enter system PIN
Your answer machine is activated. It tells you how
much memory time is left. The messages are now
played back. The answer machine cannot be deac-
tivated remotely.
(Arabian).
2
.
1
on the handset and
¢
while listening to
9
key and enter the
11

Locating a handset ("paging")

You can locate your handset using the base station.
◆ Briefly press the registration/paging key on the
¢
base station (
◆
All handsets will ring simultaneously ("pag-
ing"), even if the ringer tones are deactivated.
End paging: briefly press the registration/paging
key on the base station (
c
talk key on a handset.
Registering handsets
You can register up to four handsets on your base
station (Gigaset AS28H) recommended).
Please note:
Each additional handset must be registered on
the base station in order for it to work properly!
For automatic registration of handsets to
Gigaset AS280/AS280DUO/AS285
Manual registration of handsets to Gigaset AS280/
AS280DUO/AS285
1. On the handset:
¢ ¢
Handset OK
tem PIN of the base station (default is 0000)
Registering flashes in the display
2. On the base station: within 60 seconds of
entering the system PIN, press and hold the regis-
tration/paging key (
Registration takes approx. 1 minute.

De-registering handsets

Handsets can only be de-registered by resetting
the base station to its default settings. This will
also reset other settings
If you have only registered handsets for other GAP-
compatible devices, these can only be de-regis-
tered with a hardware reset
page 1).
¢
page 1) or the
¢
page 6.
¢ ¢
MENU Settings
¢ ¢
Enter the sys-
Register HS
.
¢
page 1) (min. 3 seconds).
¢
page 12.
¢
page 12.
OK
¢
. 
OK