Siemens Gigaset AS280 User Manual page 6

Placing the handset in the base station and registering
V
Put into base
MENU
V
Registering
V
INT MENU
If you have purchased a model with multiple handsets, repeat the registration process
for each individual handset. Handsets are assigned the lowest available internal number
(1–4). If more than one handset is registered to the base station, the internal handset
number appears in the top left of the display, e.g. 2. If the internal numbers 1–4 are
already assigned to other devices, number 4 will be overwritten.
Please note
◆
Each key press interrupts the automatic registration.
◆
If automatic registration does not work, the handset will have to be registered
¢
manually ( page 11).
◆
Only place the handset in the base station or charging cradle that is intended for
it.
Initial charging and discharging of the batteries
The correct charge level can only be displayed if the batteries are first fully charged and
discharged.
¤
Place the handset in the base station or charging cradle for
eight hours.
¤
Then remove the handset from the base station or charging cradle
8 h
and do not replace it until the batteries are fully discharged.
6
Before you can use the phone, you must first register the
handset to the base station.
¤
Place the handset with
the display facing up
in the base station.
The handset registers automatically.
Registration can take up to 5 minutes. 
Do not remove the handset from
the base station during this time.
After successful registration, the idle screen is displayed.
Charge status of the batteries:
= e V U
– (flat to full)
=
– flashes: batteries almost flat
e V U
– flashes: charging