Vcr Reset; Guarantee - Sharp VC-M313HM Operation Manual

VCR RESET

1.
STOP
Press to switch on the VCR.
2.
Press and hold MENU
for 10 seconds.
3.
The AUTO INSTALLATION screen should now be showing on your TV.
4.
Follow the on-screen display to proceed with auto installation.
Refer to the CUSTOMISED INSTALLATION
• Your VCR could not tune automatically - due to for example poor reception.
• You wish to re-arrange the channel order.
• You wish to change the time on the clock or if the VCR could not set the time.
All the programmes should now be correctly tuned in and the clock set.

GUARANTEE

SHARP Electronics (UK) Ltd. (hereafter called Sharp) guarantee to provide for the repair, or at
its option the replacement, of this product subject to the conditions listed below:
1.
This guarantee shall only apply to faults which are due to inferior workmanship or
materials. It does not cover faults or damage by accident, misuse, fair wear and tear,
neglect, tampering with the product, or repair other than by a Service Facility appointed
by SHARP.
2.
As this product is intended for private domestic use only, the guarantee will not apply if
the product is used in the course of a business, trade or profession.
3.
To benefit from this guarantee, any fault which occurs must be notified to SHARP, or its
appointed Service Facility within one year from the date this product was purchased.
Proof of purchase must be provided.
4.
The guarantee does not cover carriage costs, batteries or video tapes.
5.
In the unlikely event of this product requiring repair, please contact the supplier from
whom it was purchased. Where this is not possible, please contact the SHARP Helpline on
the telephone number given below.
6.
This guarantee is offered as an additional benefit to your statutory rights and does not
affect these rights in any way.
7.
No person has any authority to vary the terms or conditions of this guarantee.
If you have any difficulty operating this product, or would like information on other SHARP
products, please telephone the SHARP Helpline on the number given below.
SHARP Helpline: Tel: 0990 274277
Please note that all calls are charged at local rate.
In the unlikely event of this equipment requiring repair during the guarantee period, you will
need to provide proof of the date of purchase to the repairing company. Please keep your
invoice or receipt which is supplied at the time of purchase.
If problems persist contact the SHARP Helpline on tel: 0990-274277
and CHANNEL
32
buttons together on the front of the VCR
chapter if