Sharp VC-M313HM Operation Manual page 19

BASIC OPERATION
HOW TO SET A DELAYED RECORDING
7.
Enter the start time using the [
NUMBER BUTTONS
minutes (when entering less than 10 hours or
minutes add a '0' before the number), for
example for 21:05 start, press
Then press to move to the next setting.
8.
Enter the stop time, for example for 22:30 stop,
2 2 3 0
press .
9.
If your VCR has long play facility and you wish to
change the RECORDING SPEED
[ / ]
to highlight SP. Press [
select standard play (SP) or long play (LP) as
required.
10.
SET
Press to confirm.
• The MENU now shows all the timer settings you
have entered. If you wish to make additional
timer recordings, repeat this procedure.
11.
When you have completed entering timer
MENU
settings, press
from the TV screen.
12.
Ensure that the tape on which you wish to
record is inserted into the VCR, then press
TIMER ON/OFF
TIMER STANDBY mode.
display.
NOTES:
• If flashes a video tape has not been inserted into the VCR.
• If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
• During recording, press
recordings to be made, the VCR will return to TIMER STANDBY.
If problems persist contact the SHARP Helpline on tel: 0990-274277
/ ] or the
, hours first then
2 1 0 5 .
, use the
/
to remove the menu
once to place the VCR in
will be shown on the
STOP ( ) to cancel the recording. If there are further
DA T E P R S T AR T S T OP
2 1 / 0 6 0 2
9 / 0 7 D 0 3
- - / - - - -
- - / - - - -
DA T E P R S T AR T S T OP
2 1 / 0 6 0 2
] to 9 / 0 7 D 0 3
- - / - -
- - / - -
16
1 2 : 0 0 1 3 : 0 0 S P
2 1 : 0 5 - : - -
- : - - - : - -
- : - - - : - -
1 2 : 0 0 1 3 : 0 0 S P
2 1 : 0 5 - : - -
- - - : - - - : - -
- - - : - - - : - -
1 / 2
S P
- -
- -
1 / 2
L P
- -
- -