Displaying Total Number Of Copies - Sharp AR-156 Operation Manual
Digital laser copier
Hide thumbs
Also See for AR-156:
- Operation manual (52 pages) ,
- Service manual (170 pages) ,
- Operation manual (23 pages)
Table of Contents
Advertisement
USER PROGRAMS
Press the print (
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
parameter number will blink on the right of the display.
Program
No.
1
2
3
3
4
5
Factory default settings are indicated with an asterisk (*).
Press the print (
the entered value will be stored.
To change the setting or to set another mode, press the clear (
copier will return to step 2.
Press the light (
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
Press the clear (
Press and hold down the clear (
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
22
00C-3-156ex.p65
) key. The entered program number will be steadily lit and the
Mode
Auto clear time
Preheat mode
Auto power shut-
off timer
Stream feeding
mode
Auto power shut-
off mode
) key. The right-hand number in the display will be steadily lit and
) or dark (
) key to return to the normal copy mode.
) key to reset the display to zero.
) key for approximately 5 seconds. The total number
22
Parameters
0
OFF
1
30 sec. * 2
3
90 sec.
4
120 sec.
0
30 sec.
1
60 sec. * 2
0
2 min.
* 1
5 min.
3
30 min.
4
60 min.
0
OFF
* 1
ON
0
OFF
* 1
ON
14/11/00, 10:45
) key. The entered
60 sec.
5
10 sec.
90 sec.
2
15 min.
5
120 min.
) key. The
Advertisement
Table of Contents
