Displaying Total Number Of Copies - Sharp AR-156 Operation Manual

USER PROGRAMS
Press the print (
currently selected parameter number for the program will blink on the right side of the
display.
Select the desired parameter using the right copy quantity (
parameter number will blink on the right of the display.
Program
No.
1
2
3
3
4
5
Factory default settings are indicated with an asterisk (*).
Press the print (
the entered value will be stored.
To change the setting or to set another mode, press the clear (
copier will return to step 2.
Press the light (

DISPLAYING TOTAL NUMBER OF COPIES

Use the following procedure to display the total number of copies.
Press the clear (
Press and hold down the clear (
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
22
) key. The entered program number will be steadily lit and the
Mode
Auto clear time 0
3
Preheat mode 0
Auto power shut- 0
off timer 3
Stream feeding 0
mode
Auto power shut- 0
off mode
) key. The right-hand number in the display will be steadily lit and
) or dark ( ) key to return to the normal copy mode.
) key to reset the display to zero.
) key for approximately 5 seconds. The total number
) key. The entered
Parameters
OFF 1 30 sec. * 2
90 sec. 4 120 sec.
30 sec. 1 60 sec. * 2
2 min. * 1 5 min.
30 min. 4 60 min.
OFF * 1 ON
OFF * 1 ON
60 sec.
5 10 sec.
90 sec.
2 15 min.
5 120 min.
) key. The