Table of Contents
Advertisement
BYPASS FEED (including special paper)
The single-sheet manual bypass can be used to feed standard paper, transparency film, labels,
and other special purpose papers measuring from A6 to A4 (3-1/2" x 5-1/2" to 8-1/2" x 14") and
in the weight range of 52 to 130 g/m
(28 to 34.5 lbs.), A4 (8-1/2" x 11") is the maximum size.)
Place the original face down on the original table. Align it with the original scale and
1
close the original cover.
The original image must be smaller than the paper or media for copying.
If the original image is bigger than the paper or media, this may cause smudges
on the edges of the copies.
Set the paper guides to the copy paper width. Insert a single sheet of copy paper (print
2
face down) into the feed slot of the manual bypass.
Copying will begin automatically.
Paper must be fed narrow side into the feed slot.
When copying onto transparency film, remove each copy promptly. Do not let
copies stack up.
TWO-SIDED COPYING
Two-sided copying can be made on this copier using the manual bypass.
Example: The following two originals will be copied onto two sides of copy paper.
First original
2
(14 to 34.5 lbs.). (For paper weighing from 104 to 130 g/m
Second original
Print face
Face up or face down
Face down
Face up
2
3
15
Advertisement
Table of Contents
