Bypass Feed (Including Special Paper) - Sharp AR-5420 Operation Manual

BYPASS FEED (including special paper)

The multi-bypass tray can be used to feed standard paper, transparency film, labels,
envelopes, and other special purpose paper. Paper measuring from A6 to A4 and in
the weight range of 56g/m
from 105g/m
• The multi-bypass tray can hold maximum of 50 sheets of paper.
• The original image must be smaller than the paper or media for
The multi-bypass tray
1
Open the multi-bypass tray and extend the tray.
10
2
to 128g/m
2 2
to 128g/m ), A4 is the maximum size.)
(Capacity will vary depending on the type of paper loaded.)
copying. If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
To close the multi-bypass tray, perform step
in the illustration and push the round projections at the right
2
of the tray until they click.
2
can be used in this tray. (For paper weighing
and then step
1