B Misfeed In The Fusing Area - Sharp AR-120E Operation Manual

Close the side cover by pressing the round projections near the side cover open button.
2
The misfeed (

B Misfeed in the fusing area

Lower the fusing unit release lever by rotating it all the way as shown in the
1
illustration.
While you are lowering the fusing unit release lever, it will not move smoothly at
a location on the way. However, be sure to lower the lever by rotating it all the
way to the location where it will not rotate as shown in the right illustration.
Fusing unit release lever
Gently remove the misfed paper from under the fusing unit as shown in the illustration.
2
If the paper cannot be removed, proceed to "C Misfeed in the transport area".
The fusing unit is hot. Do not touch the fusing unit when removing misfed paper.
Doing so may cause a burn or other injury.
Do not touch the surface of the drum (green portion) of the drum cartridge
when removing the misfed paper. Doing so may cause smudges on copies.
Do not remove the misfed paper from above the fusing unit. Unfixed toner on
the paper may stain the paper transport area, resulting in smudges on copies.
) indicator will go out and the ready (
MISFEED REMOVAL
) indicator will light up.
6
25