Misfeed Removal - Sharp AR-205 Operation Manual

SINGLE PASS FEEDER ( AR-SP2 )/REVERSING SINGLE PASS FEEDER (AR-RP1)

Misfeed removal

A
C
Location A
Feeding roller cover
Location B
Right side cover
Location C
Roller
If an original misfeed occurs in the SPF or RSPF, the
copier will stop and the red indicator which indicates an
original misfeed will blink.
B
1 Open the feeding roller cover and pull the original gently
to the left and out from the document feeder tray. Close
the feeding roller cover.
2 If the misfed original cannot be removed in step 1, open
the right side cover and remove the misfed original.
Close the right side cover.
3 If the misfed original cannot be removed in steps 1 and
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed. If the misfed
original cannot be easily removed from the exit area,
open the front part of the document feeder tray to
remove the original. With the RSPF, pull out the reversing
tray to remove the misfed original.
With the RSPF, after removing the misfed original from
the exit area, be sure to insert the reversing tray into
the exit area until it locks in place.
4 Open and close the document feeder cover to cancel the
misfeed location indicator.
After misfed originals are removed, a number may
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START ( ) key to resume copying.
65