Sharp AR-205 Operation Manual page 45

Program No. 12: Account number change
Program No. 12 is used to change account numbers. When program No. 12
is entered, an account number will appear in the copy quantity display.
If no account number has been registered, "12E" will appear in the copy
quantity display. Press the
40.
Program No. 13: Account number deletion
Program No. 13 is used to delete accounts. When program No. 13 is entered,
"0" will blink on the right side of the copy quantity display.
If no account number has been registered, "13E" will appear in the copy
quantity display. Press the
40.
key. The copier will return to step 2 on page
1. Use the copy ratio display (
number to be changed.
Use the
2. Press the START (
The account number will be erased and "–––" will blink in the copy
quantity display.
3. Enter a new account number using the numeric keys.
4. Press the START (
If a number that is already registered or "000" is entered, the number
will blink in the copy quantity display.
5. Repeat steps 1 to 4 for other account numbers.
6. To continue with other user programs, press the
and enter another program number. To exit the user
program mode, press the light (
key. The copier will return to step 2 on page
1. To delete an individual account, press the 0 key.
To delete all accounts, press key 1.
2. Press the START (
If you have pressed the 0 key in step 1, an account number will appear
in the copy quantity display. Proceed to step 3.
If you have pressed key 1, all account numbers will be deleted. Proceed
to step 5.
3. Use the copy ratio display (
number to be deleted.
Use the
4. Press the START (
The specified account will be deleted.
5. To continue with other user programs, enter another
program number. To exit the user program mode, press
the light (
USER PROGRAMS
) key to select the account
key to advance through the account numbers.
) key.
) key.
) key.
) key to select the account
key to advance through the account numbers.
) key.
) key.
key
) key.
43