Sharp AR-205 Operation Manual page 64

SINGLE PASS FEEDER ( AR-SP2 )/REVERSING SINGLE PASS FEEDER (AR-RP1)
62
3 Press the START (
For two-sided copying, a multiple number of copies can only be set if
an optional electronic sorting kit is installed.
Two-sided copies from two-sided originals
To copy in the two-sided to two-sided copy mode, an optional reversing
single pass feeder (AR-RP1) must be installed.
Ensure that no original is left on the original table.
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
5-1/2" x 8-1/2" size original or copy paper cannot be used.
Use the ORIGINAL TO COPY key to select
2
If this mode is selected, the SPF indicator will light up.
) key.
.