Sharp AR-M150 Operation Manual page 66

USER SETTINGS
Program
number
8
9
10
11
12
13
64
Program name
ROTATE ORIG.
IMAGE
AE/TEXT
RESOLUTION
2-SIDED COPY
MODE
MARGIN WIDTH
MEM. FOR
PRINTER
AUTO KEY
REPEAT
Setting codes
(factory default
setting appears
in bold)
• When two-sided copying is
1: ON
2: OFF
• This setting is used to change
1: 300dpi
2: 600dpi
• If the memory fills up when
1: HI-SPEED
2: NORMAL
1: 5 mm (1/4")
• Use this setting to set the
2: 10 mm (1/2")
3: 15 mm (3/4")
4: 20 mm (1")
1: 30%
• Use this to change the
2: 40%
3: 50%
4: 60%
5: 70%
• Use this setting to select
1: ON
2: OFF
Explanation
performed, this function
rotates the image on the back
of the original. This is
convenient when binding the
copies at the top (tablet
binding).
the copy resolution in AUTO
and TEXT mode from 600 x
300 dpi to 600 x 600 dpi (high-
quality mode). Scanning is
slower when high-quality
mode is used.
two-sided copying is
performed, "NORMAL" can be
selected to make copying
possible. However,
"NORMAL" results in a slower
copying speed. Normally "HI-
SPEED" is selected to enable
fast two-sided copying.
margin width.
proportion of machine
memory used for printer
mode.
whether or not holding down a
key causes repeated input of
the key. For keys that
normally cause a set value to
increase when held down (for
example, holding down the
[ ] key ( ) or [
( )), this program can be
used to have the set value not
change when the key is held
down.
] key