Sharp AR-M150 Operation Manual page 41

5
The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
6
Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
7
Click the "Standard"
button.
"Integrated Installer is
preparing..." will appear and
then installation of the MFP
driver, Button Manager, and
Sharpdesk will begin
automatically.
Follow the on-screen
instructions.
8
When the "Finish" screen appears, click the "Close" button.
A message will appear instructing you to connect the machine to your
computer. Click the "OK" button.
If you are running Windows 2000/XP and a warning message appears
Caution
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway" or "Yes".
After the installation, a message prompting you to restart your computer
Note
may appear. In this case, click the "Yes" button to restart your computer.
9
Make sure that the power of the machine is turned on, and then
connect the USB cable (p.55).
Windows will detect the machine and a Plug and Play screen will appear.
If the following message appears on your computer screen, close it.
Caution
A window regarding "HI-SPEED USB Device" will then appear. Close the window.
This message appears when the machine's USB 2.0 mode is not set to
"HI-SPEED". For information on switching the USB 2.0 mode, see
Chapter 6, "PRINTER/SCANNER FUNCTIONS"
SET UP THE SOFTWARE
(p.57)
.
5
39