Creating Margins When Copying (Margin Shift) - Sharp AR-M150 Operation Manual

CREATING MARGINS WHEN COPYING
The margin shift function is used to automatically shift the text or image or the copy
paper approximately 10 mm (1/2").
As shown below, LONG EDGE or SHORT EDGE can be selected.
Document glass
Note
1
Place the original(s).
2
Press the [E-SORT/SP.FUNC (
until "MARGIN SHIFT" appears and then
press the [OK] key.
34
AB
SPF/RSPF
B A
Original
• This feature cannot be used with the 2 IN 1 feature.
• The margin width can be changed with "MARGIN WIDTH" in the user
programs. (p.64)
• Note that a margin is created by shifting the image, and thus if the
image is shifted too far, the edge of the image may be cut off.
SHORT EDGE
AB
Margin
Copy
)] key
1,2,3,
1,2,3,
SP. FUNC
(Margin shift)
LONG EDGE
AB
Margin
SPECIAL FUNCTION
MARGIN SHIFT
1,2,3,
1,2,3,
SP. FUNC