Using The Document Glass - Sharp AR-M150 Operation Manual

Using the document glass

1
Place the original that you wish to copy onto the front side of
the paper on the document glass and close the document
cover/SPF/RSPF.
2
Press the [2-SIDED COPY (
"1 TO 2" appears, and then press the [OK]
key.
3
4
Press the [
select the binding edge and then press the
[OK] key.
Select "LONG EDGE" or "SHORT EDGE".
The "LONG EDGE" and "SHORT EDGE" are
shown in the illustration on the preceding page.
5
Select the number of copies and any other settings, and then
press the [START] key (
The original for the front side is scanned into the memory.
• If you need to clear the data scanned into memory, press the
Note
[CLEAR] key (
• If you wish to cancel two-sided copying and just make a copy of the
first original, press the [
6
When "[START] : NEXT SCAN [#] :
START PRINT" appears, remove the
first original and then place the
original that you wish to copy onto
the back side of the paper on the
document glass. Close the
document cover/SPF/RSPF.
Place the second original in the same
orientation as the first original.
7
Press the [START] key (
The copy will be delivered to the paper output tray.
To cancel automatic two-sided copying, press the [CLEAR ALL] key
Note
( ) or press the [2-SIDED COPY (
then press the [OK] key.
CONVENIENT COPY FUNCTIONS
] key ( ) or [ ] key (
).
).
] key.
).
)] key until
2-SIDED COPY
) to
BINDING EDGE
The first original The second original
)] key, select the "1 TO 1", and
1 TO 2
1,2,3,
1,2,3,
SP. FUNC
LONG EDGE
1,2,3,
1,2,3,
SP. FUNC
4
27