Appendix; Symbols And Typographical; Conventions Used; Care - Siemens Gigaset C45 Operating Instructions Manual

Appendix

Symbols and typographical

conventions used

This section explains the meaning of certain
symbols and typographical conventions that
are used in this user guide.
~
Enter digits or letters.
The display functions currently in
§Menu§
the bottom display line are shown
in reversed highlights. Press the
relevant display key to launch the
function.
q
Press the top or bottom of the
control key, e.g. when scrolling.
c Q P
/ / etc.
Press the matching key on the
handset.
/
External Calls Internal Calls
Select one of the menu functions
(External Calls
from the list and press
¢
Audio Settings
§Menu§
(example)
Press
§Menu§
q
with and press
with
Melody

Care

¤
Wipe the charging cradle and the handset
with a damp cloth (do not use solvent) or an
antistatic cloth.
Never use a dry cloth. This can cause static.

Contact with liquid

If the handset has come into contact with liq-
uid:
¤
Switch the handset off and remove the
batteries immediately.
¤
Allow the liquid to drain from the handset.
¤
Pat all parts dry, then place the handset with
the battery compartment open and the key-
pad facing down in a dry, warm place for at
least 72 hours (not in a microwave, oven
etc.).
¤
Do not switch on the handset again until
it is completely dry.
When it has fully dried out you will normally be
able to use it again.
(example)
or Internal Calls )
.
§OK§
¢
Ringer Melody
. Select Audio Settings
. Select
Ringer
§OK§
q
and press .
§OK§
!

Questions and answers

If you have any queries about the use of your
phone, you can contact us any time at
www.siemens.com/gigasetcustomercare.
The table below contains a list of common
problems and possible solutions.
The display is blank.
1. The handset is not switched on.
¥
Press and hold the end call key
2. The battery is flat.
¥
Charge the battery or replace it (page 5).
The keys of a handset do not respond when
pressed.
The keypad lock is activated.
¥
Press and hold the hash key
Base flashes in the display.
1. The handset is outside the range of the base sta-
tion.
¥
Move the handset closer to the base.
2. The base station is not switched on.
¥
Check the base station mains adapter.
Please Register flashes in the display.
The handset is not registered.
¥
Register the handset (page 5).
Handset does not ring.
The ringtone is switched off.
¥
Activate the ringtone (page 13).
You hear an error tone when keying an input
(a descending sequence of tones).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the operating
instructions if necessary.

Service (Customer Care)

We offer you support that is fast and tailored to
your specific needs!
Our Online Support on the Internet can be
reached any time from anywhere.
http://www.siemens.com/gigasetcustomercare
It provides you with 24/7 support for all our
products. It also provides a list of FAQs and
answers plus user guides and current software
updates (if available for the product) for you to
download.
You will also find frequently asked questions
and answers in the appendix of this user guide.
Appendix
a
.
#
(page 7).
15