Setting up the handset for use
Notes:
–
After the first battery charge and discharge you
may replace your handset in the charging cradle
after every call.
–
The handset should only be placed in a base sta-
tion or charging cradle that is designed for it.
–
When the handset is in the cradle, it charges even
if it is switched off. You will see the charge status
in the display.
–
If the handset has switched itself off because the
batteries are flat and if it is then placed in the cra-
dle, it will switch itself on automatically.
Please note:
–
Always repeat the charging and discharging pro-
cedure if you remove the batteries from the hand-
set and insert them in again.
–
The batteries may warm up as they are charging.
This is not dangerous.
–
After a while the charge capacity of the batteries
will decrease for technical reasons.
Setting the date and time
¢
¢
Settings
Date/Time
§Menu§
~
Enter the day, month and year
with 6 digits and press
to move between the fields.
~
Enter hours and minutes with 4
digits (e.g. 0 7 1 5 for 07.15 hrs)
and press
between the fields.
Your Gigaset C45 is now ready for operation!
6
q
. Use
§OK§
q
. Use
to move
§OK§